Self-lubricating steel backed bushing bearings combine the advantages of many conventional lubricated metal plain bearings - especially high load capacities and dimensional stiffness - with the design freedom of self-lubricating materials, including the ability to perform well beyond conventional lubricants.
Custom Solutions for Demanding Technical Requirements
We work closely with our customers to develop new self-lubricating bronze bushings solutions that are then added to our list of catalog bronze bushing products.
Self-Lubricating Bronze Bushing, Steel Backed Plain Bearing
Metal-Polymer Bearings Bearings Replacement sleeve
Discovery bushing bearing, relating to plain bearings and self-lubricating bushings material and bushing price ...
Plain-Bearing - Bore size, OD size, Length size, Material
80160/ Plain Bearing - ID=242, OD=247, Length=100mm
80161/ Plain Bearing - ID=300, OD=305, Length=100mm
VIIPLUS SLIDING BEARING Our range offered SME includes Metal Bushing, Steel Sleeve BushingThrust Washer, Bronze Graphite Plate, Valve Gearbox Bushings, and more. Besides these, we are also rendering Metal Coating Self-lubricating bearing Strips, Material Export Service and more.
Plain bearing materials Plain bearing Strips, Slide paths PAS Strips Material in detail Strip Metric Streifen, Gleitbahnen | VSB-10
Impregnated with our own proprietary lubricant, these bushings are composed of and special material uniformly dispersed within polyacetal plastic resin, a plastic material offering excellent bearing characteristics.
VSB-10 Strips, Slide paths PAS
Steel + Bronze Powder + /Fibre Strips
For all the global industry
Provide high-quality self-lubricating products
Wrapped Steel Self Lubricating Bearings Oilless Sliding Series
Characteristics
VSB-10 Streifen, Gleitbahnen PAS
Strips PAS are available as an even material section. This material section can be used to make sliding elements in a variety
of shapes.
Table of Contents
Material information
Plain bearing production
Characteristics: maintenance-free and robust
Material composition
Models and tables of dimensions
More information
Plain bearing Bearing Material production
Bushes PAP...
• Cylindrical bushes
Flange liners PAF..
• Collar bushes
Thrust washers PAW..
• Thrust washers
• Strips
Characteristics of VSB-10 strips material
1.Very low stick-slip tendency
2.Low wear
3.Good chemical resistance
4.Low friction value
5.No tendency to weld to metal
6.Extremely swell-resistant
7.Does not absorb water
Preferred areas of application
1.Maintenance-free operation under dry-running conditions
2.Rotating or oscillating movements
3.Up to a velocity of 2 m/s
4.Linear movements
5.Temperature range -200 °C to 280 °C
Strips Material composition
• Layer system 10 srtips
1. Running-in layer
| matrix with bulking agent¹ | |
| Layer thickness [mm]: | max. 0.03 |
2. Sliding layer
| Tin-lead-bronze | |
| Layer thickness [mm]: | 0.20–0.35 |
| Pore volume [%]: | approx. 30 |
3. Bearing back
| Steel | |
| Steel thickness [mm]: | Variable |
| Steel hardness [HB]: | 100–180 |
1 The pores of the sliding layer are also filled with this lubricant mass.
Models and tables of dimensions
with steel back, maintenance-free
If these material sections are used to create slide paths, they have the following main functions:
1.Absorbing and transferring forces acting vertically to the running surface
2.Fixing moving components to each other
3.Ensuring guidance accuracy for axial movements over the entire service life
Strips are available in two material groups:
1.Material group P1 for maintenance-free, dry-running applications
2.Material group P2 for low-maintenance, lubricated applications
For the advantages of each group and help deciding which material group is best for the relevant use, please refer to the information provided in the section cylindrical bushes, flange liners and thrust washers.
VSB-10 Steel + Bronze Powder + /Fibre Bushings
· Bushing material suitable for lubricated applications
· self-lubricating bushings offer very good wear and low friction performance over a wide range of loads, speeds and temperatures in dry running conditions
· Anti-friction bearing suitable for linear, oscillating and rotating movements
Material is designed to operate without supplemental lubrication and will perform excellent when lubrication is present. Low friction, low wear rate, good sliding characteristics and very low absorption are a few of the features of this material. VSB-10 bushings will support rotary, linear and oscillating motion.
Strusture
1. /Fibre mixture thickness 0.01~0.03mm. It is the contact surface for the rotating shaft. Minute partides of the layer and the sintered bronze material combine to create a solid lubricant film, which coats the shaft.
2. Sintered bronze powder thickness 0.20*0.35mm,A special composition of powdered copper is thermally fused to the steel backing. This contact layer acts as an anchor for the layer and conducts the thermal build up away from the bearing surfaces.
3. Low-carbon steel backing. Setting the foundation of the bushings, the steel back provides exceptional stability, load carrying and heat dissipation characteristics.
Structure And Composition
· Metal-Polymer Composite Self-lubricating Bushing Material
· Steel Back + Porous Bronze Sinter +
· + Lead
Microsection
| 
| Sliding layer
+ Lead
Porous Bronze Sinter
Steel Backing
|
| OPERATING PERFORMANCE |
| Dry | Very Good |
| Oil lubricated | Good |
| Grease lubricated | Fair |
| Water lubricated | Fair |
| Process fluid lubricated | Fai |
| GENERAL | | Unit | Value |
| Maximum load, p | Static
Dynamic | N/mm2
N/mm2 | 250
140 |
| Operating temperature | Min
Max | °C
°C | - 195
280 |
| Coefficient of linear thermal expansion | Parallel to the surface | 10-6/K | 11 |
| Normal to the surface | 10-6/K | 30 |
| DRY | | | |
| Maximum sliding speed, U | | m/s |
2.0 |
| Coefficient of friction | | | 0.03 - 0.20 * |
| OIL LUBRICATED | | | |
| Maximum sliding speed, U | | m/s |
＞2.0 |
* Depending on operating conditions
Technical data
| Max. load | Static | 250N/mm2 |
| Dynamic | 140N/mm2 |
| Max. speed | Dry | 2m/s |
| Lubrication | >2m/s |
| Max. PV (Dry) | Short-time | 3.6N/mm2*·m/s |
| Continuous | 1.8N/mm2*·m/s |
| Temp. | -195℃~+280℃ |
| Friction coefficient | 0.03~0.20 |
| Thermal conductivity | 42W (m·k)-1 |
| Coefficient of thermal expansion | 11*10-6k-1
|
Bearing forms available in standard dimensions
- Cylindrical bushes
- Flanged bushes
- Thrust washers
- Flanged washers
- Sliding plates
Metric bearings and imperial bushings made to order: standard bushing forms in special dimensions, half-bushings, special shapes obtained by stamping or deep drawing, customized bushing designs
Typical Applications
This material meets the demanding criteria for long life and maintenance free performance with or without lubrication.
Automotive: tractors, combines, crop sprayers, earth-movers, graders and other construction, auto machines, specific uses in power steering cylinders, steering gear thrust washers, disc brakes, calipers and pistons, shock absorbers, governor linkage, windshield wiper motor, tilt gear assemblies...
Business machines: photocopy machines, typewriters, mail sorters, postage meter systems, computer terminal printers and peripheral equipment, automatic printing devices, mail processing machinery...
Hydraulics and valves: pumps including gear, rotary, water, axial piston, and other types, ball, butterfly, poppet steam, and other valves and valve trunnions...
Home appliances: tape recorders, refrigerators, air conditioners, cleaners, polishers, sewing machines, ovens, dishwashers, clothes washing machines...And materials handling, marine engine, packaging, textile equipment, tools...etc.
START YOUR
a project with an Application Engineer
Bushings, Lubricated Bearings, Composite Bearings, Metal Bearings, Compressor Bearings, Metal-polymer, Filament Wound, Plain Bearings, Flange Bearings, Polymer Bearings, Flange Bushings, Pump Bearings, Flanged Bushes, Thrust Plates, Industrial Bearings
Product Tags:
|
|
Slide Paths PAS Bronze Bushing Material Metric Sleeve Bearings Strips Plate Images
|
